Motor, Incline
|
Incline motor.
NOTE: There is a speed sensor inside this motor, some models did not use this, so you may not need to plug in the "EXTRA" wire if you unit does not have one currently.
Note: These motors came with several different wire harnesses (or possibly none at all) attached to the motor start capacitor. You may have to re-use the wire harness currently in your unit or you may have to splice a wire harness together.
NOTE: You will recieve which ever wire harness configuration that we currently have in stock. If you are not willing to make the wiring changes needed, please do not order this part. |
* Images may not be identical to part.
# |
Part Name (Click to view) |
BOM Qty | 1 | Screw | 26 | 2 | Screw | 4 | 3 | Screw | 3 | 4 | Screw | 6 | 5 | Screw | 4 | 6 | Screw | 2 | 7 | Screw | 2 | 8 | Screw | 1 | 9 | Washer | 6 | 10 | Washer, Locking | 2 | 11 | Nut | 3 | 12 | Washer, Locking | 4 | 13 | Screw, Self Drilling | 5 | 14 | Screw | 4 | 15 | Screw | 4 | 16 | Screw | 11 | 17 | Screw | 2 | 18 | Screw | 2 | 19 | Screw | 2 | 20 | Screw | 1 | 21 | Screw | 1 | 22 | Screw | 2 | 23 | Screw | 8 | 24 | Screw | 3 | 25 | Screw | 8 | 26 | Screw | 2 | 27 | Screw | 4 | 28 | Washer | 2 | 29 | Washer, Lock | 2 | 30 | Retainer | 2 | 31 | Nut, Nylock | 4 | 32 | Nut | 4 | 33 | Tinnerman Clip | 3 | 34 | Plug, Hole | 2 | 35 | Tool, Belt Adjustment | 1 | 36 | Tool, Adjustment, Belt | 1 | 37 | RAIL,DECK,ARPS,LT,W/DECAL | 1 | 38 | Decal, Foot Rail | 2 | 39 | Decal,Warning | 1 | 40 | ISLATR,DECK,ARPS | 2 | 41 | Deck | 1 | 42 | Treadbelt | 1 | 43 | Belt guide | 2 | 44 | Endcap, Internal, Rectangle | 2 | 45 | Spacer, Frame | 2 | 46 | Screw | 1 | 47 | Roller, Front | 1 | 48 | Magnet | 1 | 50 | NLA Latch, storage | 1 | 52 | RAIL,DECK,ARPS,RT,W/DECAL | 1 | 54 | NLA Bracket, Roller, Rear | 2 | 56 | Grip, Handlebar | 2 | 57 | NLA Foot, Rear, Right | 1 | 58 | NLA Plug, Endcap | 2 | 59 | Foot, Rear, Left | 1 | 60 | UPRT,BASE,ARPS,W/DECALS | 1 | 61 | NLA Roller, Idler | 1 | 62 | NLA HOOD,COWLING,ARPS | 1 | 63 | Cover, Motor | 1 | 65 | WIRE,JMPR,008",G/Y,R/RF01731CB | 1 | 66 | Belt, Drive, Flexonic | 1 | 67 | Motor, Drive | 1 | 68 | RPM sensor | 1 | 69 | Retainer Clamp | 1 | 70 | Cover, Motor, Lower | 1 | 71 | Switch, On/Off | 1 | 72 | Grommet, Strain Relief | 1 | 73 | Power Cord | 1 | 74 | Controller | 1 | 75 | Wire, Green | 1 | 76 | Wire tie | 3 | 77 | NLA Upright, Left | 1 | 78 | NLA Cover, Hub | 2 | 79 | UPRT,RT,STLGS | 1 | 80 | Spacer | 1 | 81 | Motor, Incline | 1 | 82 | NLA Spacer, Upright, Left | 1 | 83 | Spacer, Upright, Right | 1 | 84 | Spacer | 4 | 85 | Endcap, Base, Front | 2 | 86 | Wire harness | 1 | 87 | Decal, Caution, English | 2 | 88 | Bumper, Leveler | 4 | 89 | Spacer | 2 | 90 | Wheel, Transport | 2 | 91 | Wire Tie | 5 | 92 | Clamp, Cable, Long | 2 | 93 | Cable Tie | 9 | 94 | LEFT ACCESSORY TRAY | 1 | 95 | Wire Harness | 1 | 96 | Base, Console | 1 | 97 | Console, Display | 1 | 98 | NLA Arm, Upper | 2 | 99 | Cupholder, Right | 1 | 100 | CRSMBR,CNSL,ARPS | 1 | 101 | Handlebar, Left | 1 | 102 | DOOR, ACCESS | 1 | 103 | Safety Key | 1 | 104 | Endcap, Handrail | 4 | 105 | Handlebar, Right | 1 | 106 | Wire harness, 20" | 1 | 107 | Cable Tie, Mounting | 1 | 108 | Cover, Hub, Resistance | 2 | 109 | NLA CONSOLE FAN | 1 | 110 | Knob | 2 | 111 | NLA Insert, Upright | 2 | 112 | NLA Screw | 2 | | Owner's Manual,GGTL596080 | 1 | | 12" RED WIRE, M/F | 1 | | WIRE,JMPR,010",Black,M/F 114011B | 1 | | Wire, Jumper, Blue | 1 | | Wire harness, Jumper | 1 | | Wire Harness | 1 | | Lube, Grease | 1 | | LIT,GGTL59608,TECHSHT | 1 | | Envelope | 1 | | Decal, Ground Warning | 1 | | Owner's Manual,GGTL596080 | 1 | | LITPAC, NOTE | 1 | | HWKIT,Assembly HDWR & PARTS | 1 | | NLA Heart Rate monitor, kit | 1 | | Accessory Kit | 1 | | Lubricant, Treadbelt | 1 | | Kit, Lube | 1 | |
|