Motor, Incline
Out of Stock - Extended Back Order. (Explain) |
|
Incline actuator motor.
NOTE: There is a speed sensor inside this motor, some models did not use this, so you may not need to plug in the "EXTRA" wire if you unit does not have one currently.
Note: These motors came with several different wire harnesses (or possibly none at all) attached to the motor start capacitor. You may have to re-use the wire harness currently in your unit or you may have to splice a wire harness together.
NOTE: You will recieve which ever wire harness configuration that we currently have in stock. If you are not willing to make the wiring changes needed, please do not order this part. |
* Images may not be identical to part.
# |
Part Name (Click to view) |
BOM
Qty | 1 | Screw | 13 | 2 | Screw | 4 | 3 | Tool, Belt Adjustment | 1 | 4 | Screw | 4 | 5 | Screw | 2 | 6 | Screw | 4 | 7 | Screw | 4 | 8 | Nut | 6 | 9 | Washer, Locking | 8 | 10 | NLA Endcap, Latch | 1 | 11 | Screw, Self Drilling | 9 | 12 | Screw | 17 | 13 | Spacer | 2 | 14 | Nut, Nylock | 2 | 15 | Screw | 1 | 16 | Screw | 2 | 17 | Screw | 2 | 18 | SCREW,PHFHMS,BPO,M8-1.25X60 | 2 | 19 | Screw | 2 | 20 | Screw | 2 | 21 | Screw | 1 | 22 | Screw | 1 | 23 | Screw | 2 | 24 | Screw | 8 | 25 | Screw | 10 | 26 | Bolt, Motor | 2 | 27 | Washer, Locking | 2 | 28 | Switch, On/Off | 1 | 29 | Screw | 4 | 30 | Washer | 2 | 31 | Washer, Lock | 2 | 32 | PULSE PLATE KIT | 1 | 33 | HB,1 BEND,LT,EBYTX | 1 | 34 | HB,1 BEND,RT,EBYTX | 1 | 35 | Shim, Motor, Drive | 1 | 36 | Nut | 2 | 37 | Tinnerman Clip | 3 | 38 | Wire harness | 1 | 39 | Wire, Jumper | 1 | 40 | Screw | 4 | 41 | RAIL,DECK,LT,ARPS,W/DECAL | 1 | 42 | Decal,Warning | 1 | 43 | Cushion, Isolator | 2 | 44 | WALKING PLATFORM | 1 | 45 | Treadbelt | 1 | 46 | Belt guide | 2 | 47 | CVR,UPRT,UPPER,LT,EBONY | 1 | 48 | Spacer, Frame | 1 | 49 | SPCR,PLSTC,.70X1.0X.165 | 2 | 50 | NLA Magnet | 1 | 51 | Roller, Front | 1 | 52 | Clamp, Cable, Long | 2 | 53 | NLA Latch, Storage | 1 | 54 | Knob | 1 | 55 | RAIL,DECK,RT,ARPS,W/DECAL | 1 | 57 | NLA Bracket, Roller, Rear | 2 | 58 | Roller, Rear | 1 | 59 | Foot, Rear | 2 | 60 | CVR,UPRT,UPPER,RT,EBONY | 1 | 61 | HOOD,PFTL57007,ARPS | 1 | 62 | Belt, Drive, Flexonic | 1 | 63 | DECAL,CUSHION,AIRTECH | 2 | 64 | Motor, Drive | 1 | 65 | FRAME,LIFT,PYSVT,ARPS | 1 | 66 | Wire tie | 3 | 67 | Wire, Green | 1 | 68 | Power Cord | 1 | 69 | Grommet, Strain Relief | 1 | 70 | Controller, Motor | 1 | 71 | RPM sensor | 1 | 72 | Retainer Clamp | 1 | 73 | Cover, Lower, Front | 1 | 74 | UPRT,LT,PYSVT | 1 | 75 | Motor, Incline | 1 | 76 | NLA Spacer, Left | 1 | 77 | Endcap, Base | 2 | 78 | UPRT,RT,PYSVT | 1 | 79 | NLA Spacer, Upright, Right | 1 | 80 | Spacer | 4 | 81 | Bumper, Leveler | 4 | 82 | Decal, Caution, English | 2 | 83 | UPRT,BASE,ARPS | 1 | 84 | Wheel, Transport | 2 | 85 | Wire Tie | 2 | 86 | Cable Tie | 11 | 87 | Door, Access | 1 | 88 | Screw | 6 | 89 | CNSL,ETPF79507,ARPS | 1 | 90 | NLA Cup holder, Left | 1 | 91 | Cup Holder, Right | 1 | 92 | Cable Tie, Mounting | 2 | 93 | Base, Console | 1 | 94 | Clamp, Console, Rubber | 4 | 95 | Bar, Bottom, HR | 1 | 96 | Plate, Pulse, Top, left, Chrome | 1 | 97 | ENDCAP,HB,L/R,EBONY | 2 | 98 | Endcap, Lower Handlebar | 2 | 99 | Plate, Pulse, Bottom, Left, Chrome | 1 | 100 | Safety Key | 1 | 101 | Wire Harness | 1 | 102 | Fan | 1 | 103 | Plate, Pulse, Bottom, Right, Chrome | 1 | 104 | Spacer | 1 | 105 | Screw | 2 | 106 | Clip | 1 | 107 | Wire harness | 1 | 108 | Screw | 4 | | Envelope | 1 | | Wire Harness, Jumper, Black | 1 | | Kit, Lube | 1 | | NLA Heart Rate monitor, kit | 1 | | Lubricant, Treadbelt | 1 | | Accessory Kit | 1 | | Chart, Exercise | 1 | | LIT,MEAL PLAN,1400 CAL | 1 | | Manual, Meal Plan, 1800 Calorie | 1 | | Literature, Meal Plan, 2200 cal. | 1 | | HWKIT,Assembly HDWR & PARTS | 1 | | LITPAC,PFTL570071 | 1 | |
|
